-4-
BASIC SAFETY INSTRUCTIONS
Warning notices and symbols in this operating manual
Danger!
Indicates that failure to comply could lead to severe injury or even death.
Caution!
Indicates that failure to comply could sometimes lead to injuries.
Note Indicates that failure to comply leads to damage to the machine or other property.
Handling information for operators
The defined sequence of the handling steps makes proper and safe handling of the machine easier.
ļ Handling instructions for the operator
The following warning and safety symbols were attached on the machine.
Observe the operating manual
Wear hearing protection
Wear safety glasses.
Noise power level
Noise level of the machine
Risk of shearing from moving parts
Rotating sawblade
Forklift transport
Warning of dangerous electrical voltage
Remove power plug before
transport or service
Open water tap when sawblade
is running
Do not remove power plug when
sawblade is running
Running direction of sawblade
To Next Page
Loading...
