Loadrite Sprint - Clearing the Short Total; Zeroing

LOADRITE SPRINT OPERATORS MANUAL
7
Press .
The Loadrite updates the total and returns
to the Ready state.
(New total 7800)
Ready
7800
Clearing the Short Total
When you want to reset the short total to
zero (e.g. after loading a truck) ready for
another loading operation,
Press .
Ready
7800
The Loadrite displays Total Cleared for
a few seconds, clears the short total for the
current product and then …
Total
Cleared
7800
…returns to the Ready screen.
Ready
0
Zeroing
It is required to zero the Loadrite from time to time. This is to avoid
inaccurate readings due to build up of material in the bucket.
(Weights shown are examples only)
Before lifting.
Make sure that the bucket is empty and
fully rolled back.
Ready
0