Loadrite Sprint - Module; Usage; Reset

LOADRITE SPRINT OPERATORS MANUAL
22
2. Use   to scroll to TrigScrn.
3. Press to select.
6. Use   to adjust the setting.
7. Press to accept the setting.
This function is only available if the Loadrite is configured to use rotary
trigger.
LD941 Data Module Properties (Module)
This function enables you to examine the properties and the status of the
data logger connected to the Loadrite. It is available only if the MMS data
logger feature has been enabled during installation.
When activated, this function will do the following:
• Display software and hardware information of the data logger
• Perform self-test
• Display data usage
To access the Data Module Properties function:
1. Press .
2. Use   to scroll to Module.
3. Press to select.
Internal Buffer Usage (Usage)
This function displays the current usage of the internal logging buffer.
Percentage free storage will be displayed.
Internal Buffer Reset (Reset)
The Reset function allows all data in the temporary internal logging buffer to
be deleted. It is recommended to run this reset function regularly.