Loadrite Sprint - 4 Weighing Procedures; Adding a Load; Auto-Add

LOADRITE SPRINT OPERATORS MANUAL
11
4 Weighing Procedures
Adding a Load
This function adds the lifted weight to the short and long.
To Add a load
(Weights shown are examples only)
Before the load is lifted.
(Current total 5600)
Ready
5600
Raise the load smoothly past the
trigger point.
The Loadrite beeps and displays
the load.
(Weight of load 2200)
Total
5600
2200
Press .
The Loadrite updates the total
and returns to the Ready state.
(New total 7800)
Ready
7800
The Loadrite has an option to use a remote add button. If fitted the remote
add button is normally mounted on the lift lever.
Auto-Add
Auto Add is an optional feature that is selected during installation. If Auto
Add is enabled, the Loadrite can automatically operate the ADD function
every time a load is lifted past the trigger point.
The Auto Add indicator light illuminates
when the Loadrite is in Auto-Add mode.
Ready
5600