LOADRITE SPRINT OPERATORS MANUAL
12
To turn on/off auto add function
1. Press .
2. Use to scroll to Auto Add.
3. Press to select.
4. Use
to adjust the setting.
5. Press
to accept the setting.
If Auto-Add is on:
The procedure for zeroing is different. See page 14.
Subtracting a Load
This function can be useful when only part of a final bucket load of loose
material is required. You can add the full bucket load and then re-weigh
and subtract the amount remaining in the bucket.
Another example is when a log has been added and then removed from a
truck.
To subtract a Load
(Weights shown are examples only)
Before the load Is lifted.
(Current total 5600)
Ready
5600
Raise the load smoothly past the trigger
point.
The Loadrite beeps and displays the load.
(Weight of load 2200)
Total
5600
2200
Press .
The Loadrite updates the total and returns
to the Ready state.
(New total 3400)
Ready
3400
To Next Page
Loading...
