Loewe BluTechVision Interactive - Markers; Repeat; Saving the Last Disc Settings; Zoom

Playback of Discs
Angle
BD DVD-V
If the DVD includes scene which have been recorded from different angles, you
can change to a different camera angle during playback.
Call up the title menu.
Select Angle .
 Select required camera angle - if available. The number
of the current camera angle is shown.
➠ An angle mark symbol is shown on the screen during scenes
which have been recorded from different camera angles.
Markers
BD DVD-V
You can start the playback from a saved marker. There is a maximum of nine
Markers can be saved.
Blue Button Press briefly during playback: Sets a marker
Press for a long time: Overlay open markers.
OK
91
T
S S
02:54:11
01:34:16
12
Move Select Select Marker Delete
Rewind / Fast forward
,Select desired marker.
OK Start playback from a selected marker.
Start playback from a desired marker.
Yellow Button Delete selected marker.
Overlay close markers.
Zoom
BD DVD-V
With the Zoom function you can increase the size of the video image and then
navigate within the zoomed in picture during playback.
Overlay open Zoom.
Yellow Button zoom out
Green Button zoom in
   Move picture cut-out.
Close zoom window.
➠ The zoom function may not work on certain discs.
Disc Menu
BD DVD-V
Video discs usually have their own menus.
Go to Disc Menu.
 Select required option.
Confirm OK.
Close Disc Menu DVD.
Repeat Section (A-B)
BD DVD-V
At the start of the section to be repeated, push the button
several times until the symbol
appears.
At the end of the section to be repeated, press OK.
Saving the last disc settings
BD DVD-V
Your BluTechVision Interactive notes the last scene of the last disc (Blu-ray disc,
video DVD) played back. The position of the last scene is saved in the memory even
if the disc is removed from the device or the device is switched off (or respectively
to standby). When this disc is inserted again, the saved scene is automatically
played back.
- 26