Start-up
Other Menu
BD Storage Select
You can make a setting whether your BluTechVision Interactive should use the
built-in storage (page 36) or an optional USB Storage for the downloaded data
when using the BD-LIVE service.
Call up the Setup menu.
Select option OTHERS.
Select option BD Storage Select.
BD Storage Select
BD Storage Clear
DivX VOD
Factory Set
Built-In Storage
USB Storage
DISPLAY
LANGUAGE
AUDIO
LOCK
NETWORK
OTHERS
Built-In Storage The storage in the BluTechVision Interactive is used
USB Storage A USB storage connected to the BluTechVision
Interactive is used
➠ The file system of the USB Storage must be formatted in FAT32
or NTFS.
Confirm OK.
BD Storage Clear
You can clear the data stored for the BD-LIVE Service (page 28) of the built-in
storage or an optional USB Storage connected.
Call up the Setup menu.
Select option OTHERS.
Select option BD Storage Clear.
Built-In Storage The built-in storage integrated in the BluTechVision
Interactive storage is deleted
USB Storage BD-LIVE data if a USB storage connected to the
BluTechVision Interactive are deleted
Confirm OK.
Confirm the safety message with Yes.
Confirm OK.
DivX Registration Code
You receive the DivX® VOD (Video On Demand) registration recognition to borrow
and buy movies using the DivX® VOD service.
Call up the Setup menu.
Select option OTHERS.
Select option DivX VOD.
DivX Reg. Code The registration code valid for your unit is displayed.
You can register for the VOD Service on the internet at
vod.divx.com. Here you can also get more information
concerning use.
Deactivate The deactivation code valid for your unit is displayed.
Confirm OK.
➠ All movies obtained from DivX® VOD can only be played
back on this device.
Factory Set
You can reset the unit to the factory settings.
Call up the Setup menu.
Select option OTHERS.
Select option Factory Set.
Confirm OK.
Confirm the safety message with Yes.
Confirm OK.
- 22
To Next Page
Loading...