Playback of Discs
BD-LIVE
Your BluTechVision Interactive supports the BD-LIVE function. This allows you
to access interactive content which is provided by certain Blu-ray disc suppliers
via the internet.
Insert the Blu-ray disc with the BD-LIVE function.
➠ The BD-LIVE function requires a broadband internet connec-
tion. Set up the access to your home network as described
from page 20 onwards.
➠ Activate the option that your BluTechVision Interactive can
create an online connection to the BD-LIVE service (page 21).
➠ If necessary, select the storage where the BD-LIVE data is to
be stored temporarily (page 22).
➠ Make sure there is adequate storage space for the BD-LIVE
content by deleting the older temporarily stored data on the
currently used BD-LIVE storage (page 22). If the internal
storage of your BluTechVision Interactive is not adequate,
you can also connect an external USB Storage medium with
1GB free storage space.
Select the BD-LIVE function in the Disc Menu of the Blu-ray disc.
The player creates an internet connection to the content
provider and represent a selection menu. These menus are
individually structured by the provider, according to supplier, and
can contain the most varied information, such as trailers, games,
current information etc.
Select menu item.
Confirm OK.
It may be possible to select menu functions with the colour
buttons.
The selected media are loaded (this can take several minutes,
depending on the speed of the internet connection) and then a
request appears to start playback or the function.
➠ Do not remove the connected external USB Storage whilst
data transmission is being carried out.
Stop 2x BD-LIVE close.
- 28
To Next Page
Loading...
