One 55
User manual
103
System settings
Connections
Sound components
The sound components wizard helps you to configure the components
that are used to reproduce the TV sound. For sound reproduction, you
can configure the TV loudspeakers, loudspeaker systems as well as
analogue and digital HiFi/AV amplifiers.
Calling the sound components wizard
For information on navigation within the wizard, see chapter General
information on menu operation.
HOME: Call Home view.
Mark System settings,
OK call System settings.
Select Connections,
go to next column.
Select Sound components,
go to next column.
Select Sound component.
For selectable items see below.
OK Confirm selection.
Proceed to next step.
...
...
Sound com-
ponents
SOUND COMPONENTS WIZARD - Sound playback via ...
Finish wizard with
Please specify here via which sound components you want to listen to your
TV sound.
Note: The newly selected parameter must be confirmed with the
button.
OK
TV speakers
Speaker system (AUDIO OUT)
HiFi/AV amplifier
HiFi/AV amplifier or TV speakers (switchable)
Sound playback via ...
Some sound components can only be selected when the respective
device is connected to the TV set.
TV
speakers
Sound reproduction via the built-in TV speakers
(factory setting).
With the selection of TV speakers the wizard will end.
Speaker
system
(AUDIO OUT)
Sound reproduction via a loudspeaker system or
active loudspeakers (connection to AUDIO OUT).
How to connect a speaker system to AUDIO OUT,
see chapter External devices, section Connecting
the speaker system (AUDIO OUT).
How to configure a speaker system at AUDIO OUT,
see chapter System settings, section Connctions
– Adjusting the speaker system (AUDIO OUT).
If a speaker system is connected to AUDIO OUT
and you want to return to selecting TV speakers,
switch the subwoofer of the speaker system off
before you select the TV speakers. At the AUDIO
OUT connection, the audio signal is output with
maximum volume setting in the TV speaker
selection.
If you are using a speaker system at the AUDIO
OUT jack, the headphone volume can no longer
be controlled separately..
HiFi/AV
amplifier
Sound reproduction via an external analogue or
digital audio amplifier.
How you connect a HiFi/AV amplifier see chapter
External devices, section Connecting the HiFi/
AV amplifier.
How you configure a HiFi/AV amplifier see chapter
System settings, section Connections –
Adjusting the HiFi/AV amplifier.
HiFi/AV
amplifier or
TV speakers
(switchable)
Sound reproduction optionally via an external
analogue or digital audio amplifier or via the built-in
TV loudspeakers.
The selection options for switching between
sound components can be called via the function
list under Sound settings.