Reference 55-85
User manual
20
Initial installation
Initial installation wizard
Initial installation after switching on for the first time
The Initial installation wizard starts automatically with an initial
installation. It may be called repeatedly again (see chapter System
settings,section Extras – Repeat initial installation).
If a parental lock is activated, the access code must be entered
before repeating initial installation (see chapter System settings,
section Control – Parental lock).
For information on navigation within the wizard refer to chapter
General information on menu operation.
First installation wizard routine
The selected settings affect the routine of the Initial installation wizard.
Select desired Menu language.
Selecting the language of the user guidance is the
wizard’s first step. Then you simply follow the
instructions on your TV screen.
Proceed to next step.
A licence agreement will be displayed.
Scroll through the licence agreement.
OK Confirm the licence agreement and proceed to
the next step.
Select Energy efficiency.
Determine how energy efficient your TV set shall
be. The value for the contrast (and thus the
brightness of the background lighting) is adapted
and the automatic dimmer activated or
deactivated depending on the presetting.
The automatic shutdown is active in the mode
Home Mode.
Deutsch (de) ǼȜȜȘȞȚțȐ (el) Svenska (sv)
English (en) Polski (pl) Dansk (da)
Français (fr) Magyar (hu) Português (pt)
Italiano (it) Suomi (fi) ȇɭɫɫɤɢɣ (ru)
Español (es) Slovenščina (sl) Norsk (no)
Nederlands (nl) Slovenčina (sk) 中文(zh)
Čeština (cs) Türkçe (tr)
INITIAL INSTALLATION - Menu language
Proceed with
Which menu language do you want to use for operation?
Menu
language
Here you define how energy efficiently you operate your TV. With the "Home Mode"
setting you put the focus on low energy consumption for home use. The "Premium Mode"
is optimised to a brighter environment with a higher energy consumption. The "Shop
Mode" is designed for operation in a showroom.
Note: If you select "Home Mode" here, the TV set will automatically switch off to save
energy after no longer being operated for 4 hours.
Energy efficiency
Back with Proceed with
Home mode Premium mode Shop mode
Energy
efficiency
Home mode:
The emphasis for home use is on low energy
consumption. The automatic dimmer is activated.
Premium mode:
This mode optimises the settings to a brighter
environment at a higher energy consumption. The
automatic dimmer is activated.
The use of this energy efficiency setting must be
confirmed afterwards once again.
Shop mode:
The picture settings are aligned to operation in
the presentation room. The automatic dimmer is
deactivated. If the ambient brightness diminishes, the
energy consumption is not reduced.
The use of this energy efficiency setting must be
confirmed afterwards once again.
The presetting can be changed later in the System
settings under Control ט Energy efficiency.
Proceed to next step.
Select Location of TV set (national defaults
are adopted).
For certain locations (e.g., Australia), there is finally
a selection screen where you can indicate in which
state/territory the device is being operated.
Proceed to next step.
Select the Operating mode.
Use the TV set as a TV set:
Continued with Connect antennas cable(s) (see
next page).
Use the TV set just as a monitor:
see chapter Initial installation, section TV set as a
monitor
Energy
efficiency
(continued)
Please specify the location of your TV set so that the available stations can be sorted
according to the specify country.
Location of TV set
Back with Proceed with
(DK) Denmark
(E) Spain
(F) France
(FIN) Finland
(H) Hungary
(I) Italy
(IRL) Ireland
(L) Luxembourg
(N) Norway
(NL) Netherlands
(NZ) New Zealand
(P) Portugal
(PL) Poland
(RUS) Russia
(S) Sweden
(SK) Slovakia
(SLO) Slovenia
(TR) Turkey
(UK) United Kingdom
Other country
Location of
TV set
Operating
mode
Please specify if you wish to use the full TV function of your set, or if you wish to use it
purely as a monitor.
Operating mode
As TV set As monitor only
Back with Proceed with
To Next Page
Loading...
Need help?
General