- 27 -
4.8 How do I connect to a Bluetooth device?
Ensure the device is turned on, has Bluetooth enabled and is
discoverable, then see “
Adding a Bluetooth device
” to connect
to it.
I can't find my device
You may be unable to find your device for a number of reasons,
these include:
The device is turned off
The device's battery is low or flat
The device is not in range
The device does not have Bluetooth enabled
The device is not in discoverable mode
Ensure the device is turned on, is in range, has Bluetooth
enabled and is discoverable, then see
Adding a Bluetooth
device
to connect to it.
What is Bluetooth pairing and why is it required?
Bluetooth pairing is a process in which two Bluetooth devices
communicate with each other through an established connection.
In CSR Harmony, this connection is made when a key (a pairing
code) is entered on both devices during connection. See
Adding a Bluetooth device
.
To pair, devices must be discoverable, that is, the device is
placed into a mode where it is able to be detected by other
Bluetooth devices within range.
Refer to the documentation that came with your device to enable
discoverable mode on your device.
To Next Page
Loading...
