- 40 -
To configure CSR Harmony as an HCRP print server:
1. Ensure the printer is connected via USB or LPT and is turned
on.
2. CSR Harmony will automatically detect the printer and start
the HCRP server.
3. Pair with a Bluetooth device.
4. On the client device, add the printer and install the printer
driver.
5. From the connected device, you can send files to print on the
installed HCRP printer over the Bluetooth link.
Configuring CSR Harmony as an HCRP client
To configure CSR Harmony as an HCRP client:
1. Pair with a Bluetooth device.
2. Right-click the device and select Services.
3. Right-click HCRP Printer and choose Add Printer.
4. Install the printer driver.
5. Use the printer from any application just like other installed
printers
To Next Page
Loading...
