Lorex Care'n'share - Temperature Alert Setup and Units

2
3
1
Press , then select Settings.
Select
Settings
Select Temp.
Display Unit
Move the joystick up and down to select
o
C (Celsius) or
o
F (Fahrenheit). Select the
desired unit for temperature display.
To select temperature units:
The temperature alert feature allows you to
ensure the baby’s room is at a comfortable
and safe temperature. The monitor beeps if the
temperature gets too hot or cold. Temperature
sensor is accurate within 3°F/1°C.
You can control the high and low temperatures
that trigger alerts or disable temperature alerts.
Temperature Alerts
1
Press , then select Alarm.
Select
Alarm
To setup temperature alerts:
22