Make sure all power cables are at
least 3ft / 1m away from the crib
and out of reach of your child.
Use the included cable clips to help
keep power cords away from your
child. See “Using the Cable Clips” on
page 9 for installation details.
38mm
Fixed Camera
Reattach the
camera base
here
7
Optional - Mounting the Camera
Tap anchors into holes with a hammer. Insert
screws 2/3 of the way.
Before permanently mounting the camera:
•Determine where you will get the best view of
your baby.
•Ensure the power cable is long enough to power
the camera.
•Test your camera(s) before mounting permanently.
1
Drill 2 holes in the wall with centers exactly
38mm apart.
2
5
Align the mounting points with the screws
and push the camera down.
To mount your camera:
3
While holding the camera base firmly in
place, twist the camera counterclockwise to
remove it from the base.
4
Reattach the base to the mounting thread on
the back of the camera.
To Next Page
Loading...
Need help?
General
