2
4
Use the joystick to select the channel you
would like to pair the camera to.
1
Place the camera and monitor next to each
other. Make sure the camera is turned on
and plugged in.
Press
, then move the joystick left or
right to select SETUP.
Select
Setup
Select
Pairing
3
If a camera is already connected to
this channel, the new camera will
replace the existing camera.
Select a
channel
to pair the
camera to.
Pairing Additional Cameras
The camera(s) included have already been
paired with the monitor. If you have purchased
additional add-on cameras (model# BB311AC1 /
BB351AC1), OR if your monitor and camera are not
paired up, follow the steps below.
To pair a camera to your monitor:
To Next Page
Loading...
