Lorex LHWF1006 Series - STEP 2: Setting Up the Recorder

Basic Setup4
2. Peel off the PLEASE REMOVE label covering the contacts on each Power Pack. Insert the
charged Power Packs into each camera base. Push up until the Power Pack ‘clicks’ into place.
LWB4800 / LWB4900 Series LWB5800 / LWB6800 Series
4.2 STEP 2: Setting Up the Recorder
Next, you must set up the recorder.
To set up the recorder:
1. Connect the recorder to your router using the in-
cluded Ethernet cable.
#LX400109; r. 5.0/56381/56402; en-US 7