Basic Setup4
c. Distance Setting: Configure distance setting for motion detection. While watching the
camera’s video on your mobile device, recreate a motion event in front of your camera.
The icon will change from
to when motion is detected by the camera. Change
the distance setting if motion detection is being triggered by unwanted events.
NOTE
Distance will be affected by temperature.
d. Buzzer: Set the recorder to sound an alarm when motion is detected.
5. Tap Save when finished. Repeat for other cameras on the system.
4.5 Quick Access to System Information
To quickly open a window with system information:
• Click
on the recorder’s Taskbar.
NOTE
The QR code shown in the System Info screen can be scanned during mobile setup to enter the system’s Device ID.
#LX400109; r. 5.0/56381/56402; en-US 14
To Next Page
Loading...
Need help?
General