Storage12
Your recorder has multiple storage options for video files. Depending on your system configura-
tion, your recorder may have come with a pre-installed 2.5” hard drive or a pre-inserted microSD
card.
You may also connect a USB storage device to the USB port labelled Storage on your recorder
for redundant storage. This means the system will automatically create a backup of the most recent
recordings on the USB drive as well as recording to the primary storage.
NOTE
Units with a pre-inserted microSD card can be upgraded with a new card up to 128GB. Units with a pre-installed
hard drive are not user upgradable.
12.1 Configuring Storage Overwrite
By default, your storage device is set to overwrite automatically, meaning that the system deletes
the oldest footage when storage is full to make way for new recordings. You can also select a num-
ber of days or hours the system should retain data for. For example, if you select 30 days, only re-
cordings more than 30 days old will be overwritten.
To configure overwrite:
1. From the live viewing screen, click
> Device > Storage.
2. Click to select the storage device you want to configure overwrite settings for.
#LX400109; r. 5.0/56381/56402; en-US 42
To Next Page
Loading...
Need help?
General