3 Connecting the Camera
NOTE
You can also add a camera to a specific channel by hovering the
mouse over an empty channel in split-screen view and clicking
.
Click Device Search and double-click the camera you would like
to add. Right click to exit.
3.4 Adding the PTZ camera to the LNK Series NVRs
To add the PTZ camera to the LNK Series NVRs:
The following instructions are based on the LNK7000 Series NVR.
See your NVR’s instruction manual for instructions on controlling the
PTZ camera with your system.
1. From live view, hover over a blank channel. Click
in the cen-
ter of the channel to add the PTZ camera from the LAN. A Quick
Add menu opens.
NOTE
If prompted, enter the system user name (default: admin) and
your password.
#; r. 4.0/47037/47040; en-US 11
To Next Page
Loading...
