6 Controlling the PTZ camera with LNR / NR Series NVRs
9. Not supported.
10. Auto scan: Click to run the selected autoscan.
11.
: Click to open the PAN/TILT/ZOOM menu, where you can
set up Presets, Tours, Patterns, and Auto Scans.
6.2.1 Presets
Presets will save a camera position for quick retrieval.
To add presets:
1. Click
to open the PAN/TILT/ZOOM menu.
2. Click the Preset tab.
3. Under the Preset text box, enter the number of the preset you
want to create.
4. Move the camera to the desired position and click Set.
NOTE
Click Del Preset to delete a preset.
5. Right-click to return to the advanced PTZ controls window.
#; r. 4.0/47037/47040; en-US 23
To Next Page
Loading...
Need help?
General
