6 Controlling the PTZ camera with LNR / NR Series NVRs
To go to a preset:
• Under No., select the number of the preset you would like to go to
and click
.
6.2.2 Tours
Tours will cycle through a set of presets.
To create a tour:
1. Click
to open the PAN/TILT/ZOOM menu.
2. Click the Tour tab.
3. Under Patrol No., select the tour you would like to configure.
4. Under Preset, select a preset you would like to add to the tour.
5. Click Add Preset.
6. Repeat steps 4 and 5 to add additional presets to the tour.
NOTE
Click Del Tour to clear all presets from a tour.
7. Right-click to return to the advanced PTZ controls window.
To run a tour:
#; r. 4.0/47037/47040; en-US 24
To Next Page
Loading...
Need help?
General
