21
Recording
Selecting Single Channel or 4 Channel motion recording
Use the Mode menu to select between single
channel and 4 Channel motion recording.
When single channel recording is activated, the
monitor will switch to the camera that detects
motion and record from that channel only.
4 Channel recording will record the entire
screen
during Quad mode (4-way-split). Videos
files recorded during 4 Channel recording will
start with the letter Q.
To select 4 Channel or single channel
recording:
1 Press , then select Recording and press
OK.
2 Select Motion Record and press OK.
3 Select Mode and
press OK.
4 Select 4 Channel re
cording or Single Channel
recording and press OK.
5 Press
until all menus are closed.
Quad mode must be selected to use 4 Channel
re
cording. To select Quad mode, press
repeatedly.
Configuring video motion detection
Video motion detection looks for changes in video
images (frames) to detect motion. Video motion
detection allows for motion detection beyond the
range of the PIR sensors.
The drawback to video motion detection is that it
can be falsely triggered by changes in lighting
conditions or trees moving in the wind. You can
disable video motion detection or configure the
sensitivity using the menus.
For a description of the two motion detection
technologies used by
the system, see “Motion
recording” on page 19.
To Next Page
Loading...
Need help?
General
