siren will beep.
- Within 10 seconds press any button on the next transmitter
to be programmed (if applicable), and repeat this process for
all remaining transmitters.
- When all transmitters have been programmed, wait for 10
seconds, or turn off the ignition.
To disable a lost or stolen transmitter from the system, use
the above procedure to programme 6 transmitters, if necessary
repeatedly reprogramming the same transmitter if less than 6
programmed transmitters are to be used.
Disconnecting the Car Battery
Before disconnecting the vehicle battery, ensure that the
alarm is disarmed in order to prevent its being triggered,
See also page 145.
For USA territories, the following statements are mandated
by the Federal Communications Commission:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIP-
MENT.
Keys & Security Alarm
To Next Page
Loading...
