Panel illumination
button
ohe22a
Instrument and Switch Illumination
The fascia mounted press button switches are backlit red
whenever the sidelamps and ignition are switched on. The
sidelamps switch itself is backlit with the ignition on. Most
switches will light up brightly when that circuit is activated, with
the brightness level dimmed when the headlamps are selected
in order to reduce any potential distraction in the dark.
The speedometer and tachometer are illuminated after door
opening or ignition key insertion, by white LEDs, with the pointers
coloured red. The lighting level of these instruments and that of
the heating/ventilation control panel (with ignition on), may be
adjusted by a switch button inboard of the steering column:
- Turn on the ignition, and repeatedly press the button to cycle
through the six levels of brightness from low to high.
Instruments & Switches
To Next Page
Loading...
