Info Button: Momentarily pressing the ‘Info’ button on the end of
the stalk will scroll through a menu of functions (see page 65).
NOTICE
Certain atmospheric conditions may result in some
condensation inside the lamp unit. This should have no signifi-
cant effect on lamp performance and is no cause for concern.
Windscreen Wiper & Washer Control
The right hand lever switch is enabled at ignition key positions
I and II, and is operated as follows:
Wiper functions
- To ‘flick’ wipe the screen, press the lever switch downwards
against spring pressure and release. The wiper will sweep
the screen once at slow speed. Holding the lever downwards
will activate further slow sweeps until released.
- For intermittent wipe, push the lever up to the first position,
and select the wipe interval by rotating the numbered collar
to one of its six positions, the wipe delay increasing at higher
numbers.
- For slow speed continuous wipe, move the lever upwards to
the second position.
- For fast speed continuous wipe, push fully upwards to the
third position.
NOTICE
In very cold weather, before attempting to use the
wiper, ensure that the blade is not frozen to the screen (use
windscreen de-icer fluid), or damage to the blade or circuit fuse
may be caused.
Windscreen washer functions
Instruments & Switches
To Next Page
Loading...
