Lotus Evora 2011 - Cruise Control

Set/raise
Resume speed
Icon only
On/off/
cancel Reduce
speed
CRUISE
CONTROLS ohe12
L
T
O
U
S
Cruise Control
The cruise control system is operated by four switches
mounted on the steering wheel spokes.
- On/off/cancel (lower left).
- Resume (upper left).
- Set/raise speed setting (upper right).
- Reduce speed setting (lower right).
The three operational states of cruise control are:
- Off.
- Enabled (but inactive).
- Active.
To enable cruise control: The system will always default to ‘off’
whenever the ignition is turned off. To enable cruise control, turn
ontheignition,andpresstheon/off/cancelswitch;thetelltale
in the instrument panel will light to confirm that the system is
enabled (although no speed has yet been set). Alternatively, this
operation may be combined with that for activation, by pressing
the on button followed by the set button (see below).
To activate cruise control: Drive the car to the desired cruising
speed and press the set button. The accelerator may now be
released, but the set speed will be maintained (road gradient
and winds permitting). The accelerator may be used to increase
speed temporarily without affecting the setting.
Cruise Control
95
oh_evoraS_a_USA.indd 95 28/04/2011 11:53:21