Safety Precautions
1.2 Safety warning signs
Notice:
1. Keep the safety warning sign clear and
visible. If there is dirt, flush them out with soap water, and wipe up
with soft cloth.
2.
If the safety mark is missing or unclear, timely contact the dealer or manufacturer to reapply for register or
replace.
3. To replace the part labeled with safety warning sign, the used part needs to be replaced with safety warning
sign.
4. The terms prompted in safety warning sign refers to personal safety, and must be strictly enforced.
Fig. 1-17 Safety warning ID IV
Meaning: when operating, you need to keep a certain space with hot surface
of machine to prevent injury.
Paste location: outside of muffler and tank side.
Fig. 1-18 Safety warning sign II
Meaning: when operating, you need to keep a certain space with tractor to
prevent injury.
Paste position: Rear end of mudguard
Fig. 1-19 Safety warning sign VI
Meaning: It is not allowed to be seated at the places other than seats to
prevent shading driver’s sight and causing injury.
Paste location: On the front side of left and right mudguard.
Fig. 1-20 Safety warning sign III
Meaning: When lifter lever control mechanism is operating, move into areas
far away top link lifting area.
Paste position: Rear end of mudguard
10
To Next Page
Loading...
