LOYTEC L-STAT - Page 12

L-STAT User Manual 12 LOYTEC
Version 1.0 LOYTEC electronics GmbH
Segment
Name
Description
Direct
Access
main_display
The main display is primarily used to
show certain values. It is not accessible
directly.
-
unit_F
All unit symbols are not directly
accessible but are displayed along with a
display value or set point if the unit is set
in the corresponding configuration
register.
See Table 28 on Page 39 for display value
configuration
and Table 29 on Page 41 for set point
configuration.
-
unit_C
-
unit_cfm
-
unit_l/s
-
unit_m³/h
-
unit_Pa
-
unit_inWC
-
unit_V
-
unit_%
-
unit_%RH
-
unit_ppm
-
Table 3: LCD Segments Overview