pg. 45
2. Pleases select a format you want in a Format conversation box
3. If you intend to change a file name to save, please change the name by using a
name menu key.
4. Please press a save now menu key after determining a location to save. When
changing a directory to save, please change the location to save by using a step
key and a dir select menu key.
▪ State
The state file saves the set-up of a device. You can save the analyzer state on a
memory with State.
▪ Trace
Trace can be saved independently or along with the analyzer state. Although
CSV type can be read in a form of a spread sheet of the PC, it cannot be drawn
to the analyzer. If you save trace 1. 2 or 3, the trace selected can be saved along
with the state. If you save the trace as All, the trace are all saved along with
State in a .trc single file.
▪ Screen
It enables you to save a screen image on a file, and to select GIF and Reverse
GIF file format. The screen image cannot be read with the analyzer.
■
Load
You can load the analyzer state and trace from the internal memory to the analyzer.
If you intend to load a file, please perform the following steps.
7. Put the select bar on a file to load by using a step key. You cannot load GIF file by
the analyzer. As for trace file, please select trace 1. 2 or 3 on Destination.
8. If you are ready to load, please press a Load Now menu key.
▪ State
The state file includes the set-up of the analyzer. If you load the state, the most
of set-up is restored to the value previously saved.
To Next Page
Loading...
Need help?
General
