pg. 54
■
Measure Cont Single
Measure(Single) indicates the measurement result through one-time measurement
sweep.
Measure(Cont) successively performs measurement, and shows the result by every
measurement sweep.
MEAS CONTROL >> Measure
■
Pause
It temporarily stops measurement. If you press Pause, it makes conversion between
the temporary pause of measurement and resume.
The key label makes conversion between Pause and Resume.
MEAS CONTROL >> Pause
■
Resume
It resumes the temporarily suspended measurement. The key label makes
conversion between Pause and Resume.
MEAS CONTROL >> Resume
5-10. Meas Setup
It indicates the measurement set-up menu. The indicated set-up menu shows differently in
accordance with selected measurement (ACP, Channel Power, Occupied BW, etc.) on the measure
menu.
■
ACP Meas Setup
It sets the adjacent channel power measurement function.
▪ Avg Number On Off
In order to designate the average measurement number, please press Avg
Number (On). When each sweep is over, the average value will appear.
MEAS SETUP >> Avg Number
To Next Page
Loading...
Need help?
General
