pg. 52
■
Marker Table On Off
It shows a marker table on the display. The information includes marker number,
trace number, X axis value, and the amplitude.
MARKER >> Marker Table
■
Marker All Off
It turns off all markers. Also, it deletes the marker indication.
MARKER >> Marker All Off
5-8. Marker →
■
Mkr → CF
It sets the marker frequency as the center frequency. On Delta marker mode, Mkr → CF
sets the center frequency as the marker delta value. Mkr → CF cannot be used when it
is on zero span.
MARKER → >> Mkr → CF
■
Mkr → CF Step
It changes the scale of the center frequency step so that it can match the activated
marker value. In order to see the scale of the step, please press FREQUENCY >> CF
Step. As for marker delta mode, the scale of the step is established as the difference
between a marker and the frequency. Mkr → CF Step cannot be used when it is on
zero span.
MARKER → >> Mkr → CF Step
■
Mkr → Start
It sets the marker frequency as the start frequency. On delta marker mode, Mkr →
Start sets the start frequency as the marker delta value. Mkr → Start cannot be
used when it is on zero span.
MARKER → >> Mkr → Start
To Next Page
Loading...
Need help?
General
