pg. 62
It changes the frequency span as 0.
SPAN >> Zero Span
■
Last Span
It changes the frequency span of the analyzer to the previous span.
SPAN >> Last Span
5-19. Sweep
Accesses the sweep time menu and accesses the sweep-time softkey functions.
■
Sweep Time Auto Man
It sets the length of time in whitch the spectrum analyzer seeps the frequency span.
If the sweep time is reduced, the sweep speed increases. The sweep time can be
changed by using the step keys, scroll knob, or the numeric key pad.
SWEEP >> Sweep Time
■
Sweep Cont Single
It witches between continuous sweep mode and single sweep mode. If you press
Sweep (Single), the analyzer will run a single sweep; when Sweep (Cont) is selected,
one sweep will follow the other as PRESET SPECTRUM.
SWEEP >> Sweep
5-20. System
The System menu appears.
■
Power On Preset
If you press the Power On Preset button, the following menus will appear.
▪ Power On Last Preset
It determines the state of the analyzer when you turn on the analyzer. When