pg. 60
5-15. Return
It returns to the previous menu
5-16. Peak Search
It automatically places a marker on the highest amplitude signal of the trace and displays the
marker’s amplitude and frequency. If there is no peak, the marker will not move. If there is no
marker indicated, marker 1 will appear.
■
Next Peak
It detects the second highest peak next to the current marker label, and moves it to
the place.
PEAK SEARCH >> Next Peak
■
Next PK Right
It moves the marker to the next highest peak of the right of the current marker. In
order to be recognized as the signal peak, the level of the signal should be moved
after it increase or decrease as much as the value of excursion (6 dB). If there is no
peak on the right, the marker will not move.
PEAK SEARCH >> Next PK Right
■
Next PK Left
It moves the marker to the next highest peak of the left of the current marker.. In
order to be recognized as the signal peak, the level of the signal should be moved after
it increase or decrease as much as the value of excursion (6 dB). If there is no peak on
the left, the marker will not move.
PEAK SEARCH >> Next PK Left
■
Min Search
It moves a marker on the current trace to the minimal level.
PEAK SEARCH >> Min Search
■
PK-PK Search
It finds out and indicates the difference between frequencies between the highest
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
To Next Page
Loading...
Need help?
General
