EasyManuals Logo

LP Technologies LPT-6000 User Manual

LP Technologies LPT-6000
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
pg. 56
In order to designate the average number, please press Avg Number (On). The
average value will appear when each sweep is over. Avg Number (Off) inactivates
the average measurement.
MEAS SETUP >> Avg Number
OBW span
It sets the span of the analyzer on the occupied bandwidth measurement.
MEAS SETUP >> OBW Span
Occ BW % Pwr
It changes the ratio of signal power used for determining the occupied
bandwidth.
MEAS SETUP >> Occ BW % Pwr
5-11. MEASURE
It performs diverse measurement functions including the Adjacent Channel Power,
Channel Power, and Occupied Bandwidth
Meas Off
It turns off the measurement function.
MEASURE >> Meas Off
ACP
It calculates power in the center and adjacent channel of a signal. A marker point
can be established as a measurement set-up menu while ACP is selected.
If you press Meas Setup while ACP is selected, you can set the adjacent channel
power measurement parameter. If you press Meas Control when ACP is selected,
the measurement can be temporarily suspended or resumed or makes conversion
between continuous or single modes.
MEASURE >> ACP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LP Technologies LPT-6000 and is the answer not in the manual?

LP Technologies LPT-6000 Specifications

General IconGeneral
BrandLP Technologies
ModelLPT-6000
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals