pg. 55
▪ Ch Integ BW
It designates the scope used in calculating the power on the center channel.
MEAS SETUP >> Ch Integ BW
▪ Offset BW
It designates the scope used in calculating the adjacent channel power.
MEAS SETUP >> Offset >> Offset BW
▪ Offset Freq
It designates the difference between the center frequency of the center
channel, and the center frequency of the adjacent channel.
MEAS SETUP >> Offset >> Offset Freq
■
Channel Power Meas Setup
It sets the channel power measurement function.
▪ Avg Number On Off
In order to designate the average number, please press Avg Number (On). The
average value will appear when each sweep is over. Avg Number
(
Off
)
inactivates
the average measurement.
MEAS SETUP >> Avg Number
▪ Integ BW
It sets the scope of making calculation of channel power.
MEAS SETUP >> Integ BW
▪ Chan pwr span
It sets the span of the analyzer on the channel power measurement.
■
Occupied BW Meas Setup
It sets the occupied bandwidth measurement function.
▪ Avg Number On Off
To Next Page
Loading...
Need help?
General
