pg. 53
■
Mkr → Stop
It sets the marker frequency as the stop frequency. On delta marker mode, Mkr →
Stop sets the stop frequency as the marker delta value. Mkr → Stop cannot be used
when it is on zero span.
MARKER → >> Mkr → Stop
■
Mkr Delta → Span
It sets the start and stop frequencies as the delta marker. Mkr Delta → Start cannot
be used when the marker is off, or is on zero span.
MARKER → >> Mkr Delta → Span
■
Mkr Delta → CF Step
It sets the difference between markers as the scale of the center frequency. If you
want to see the scale of the step, please press FREQUENCY >> CF Step. Mkr Delta →
CF Step cannot be used when the marker is off, or is on zero span.
MARKER → >> Mkr Delta → CF Step
■
Mkr → Ref Lvl
It sets the analyzer so that reference level can be the amplitude of a marker. On
delta mode, Mkr → Ref Lvl sets the reference level as the difference of amplitudes
between markers.
MARKER → >> Mkr → Ref Lvl
5-9. Meas Control
It enables you to temporarily stop the power measurement function usable on a measure key
menu, or resume it. Also, the Meas Control enables you to select continuous sweep or single
sweep.
■
Restart
It repeats measurement from the beginning.
MEAS CONTROL >> Restart
To Next Page
Loading...
Need help?
General
