pg. 67
TRACE >> Clear Write
■
Max Hold
The Max Hold function displays and continuously updates the trace to display the
highest peak amplitude of signal level.
TRACE >> Max Hold
■
Min Hold
The Min Hold function displays and continuously updates the trace to display the
lowest amplitude of signal level.
TRACE >> Min Hold
■
View
The View function freezes the trace and displays trace information. The trace
information is not updates even after a seep. To return to a continuous trace, press
the “Clear White” key.
TRACE >> View
■
Blank
Save amplitude data on the selected trace, and delete it on the display. The trace
memory selected will not be renewed even after sweep. This function will be
applied to trace 2 and 4 when inputting AC power.
TRACE >> Blank
To Next Page
Loading...
