EasyManua.ls Logo

LP Technologies LPT-6000 - Page 8

LP Technologies LPT-6000
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
pg. 8
Standard Frequency (10 MHz, Ref.)
► Temperature Stability : ±0.5 ppm
► Aging : ±0.5 ppm / Year
► Connector : BNC female
► Input Level : −5 dBm to +15 dBm
► Output Level : 10 MHz, +8 dBm nominal
Interface
► RS-232C
► Printer
Driver : PCL3 or PCL5, HP, EPSON, Laser-Jet, Desk-Jet etc. supports most of printers
Connector : for standard 25 pin female D-Sub parallel printer, support USB
► USB 2.0 Host
Printer Driver : Supports most of printers including HP, EPSON, Laser-Jet, Desk-Jet, etc.
USB Storage Device : supports 1.1, 2.0, for storing image files, supports GIF format
► Ethernet (Option)
10-Base-T Ethernet : supports Internet remote control
► GPIB Interface (Option) : IEEE 488 bus
General Specifications
► Size : 350 (width) × 195 (height) × 375 (length) mm
► Weight : 10 kg
► Warming-up Time : More than 20 minutes for precise measurement
► Power
Supply Electrical Power : 100-240 VAC at 50 / 60Hz
Consumption Power : 80 watts maximum (when an option is not built in)
► Operating Temperature : 0 ℃ to 40 ℃
► Temperature for Storage : −20 ℃ to 70 ℃
RF Emissions, Immunity
RF emissions : EN 550011,
FCC PART15 Section 15.101
RF Immunity : EN 61326
►
Altitude : 75kPa – 106kPa

Related product manuals