10
GIPAM User Manual
2) Voltage
Each phase of voltage measurement value will be displayed continuously with the “V”
unit by repeating to push the touch switch “V”.
Type of wiring Displayed phase Remark
1P2W
1P3W
3P3W
3P4W
Measurement value of each phase
RN → TN → RT
RS → ST → RT
RN → SN → TN →RS → ST → RT
3) Power
Active power is displayed with “W” unit by pushing touch switch “W” and reactive
power will be displayed with “Var” by pushing touch switch Var.
4) Energy
Active energy is displayed with “WH” unit by pushing touch switch “Wh” and reactive
energy will be displayed with unit “Varh” pushing touch switch Varh.
5) Power Factor
Power factor is displayed by pushing touch switch PF with “%” unit and also
displayed “LEAD” or “LAG”.
6) Frequency
Frequency is displayed by pushing touch switch F with “Hz” unit and it
displays the first decimal place.
6-1-3 Special Function
Pushing the FUNC Switch, it is transferred to special function mode and the switch
lamp is turned on. It shows special function mode continuously during the switch lamp
of FUNC Switch is on. If operator pushes the FUNC Switch again, it will return to
standard mode. If it is changed to special mode, measuring switch function will be
changed and it displays as followings:
1) FUNC+V: It displays PT ratio setting value of DIP Switch.
2) FUNC+A: It displays CT ratio setting value of DIP Switch.
3) FUNC+A: It displays wiring type
To Next Page
Loading...