LS Industrial Systems GIPAM - GIPAM Setting Data; Requesting Setting Data

39
;AD7!===IgYfAUbiU`
Fault occurred time(4Byte) + Data(4Byte)) / 256 ⇒ The residual
※ Checksum is the sum of each bytes not to include OVERFLOW.
.
11.1.9 GIPAM Setting Data
- Requesting the set Data
Command 1D
Sub Command
00h : Measuring Part Setting
01h : OCR/OCGR Setting
02h : OVR/UVR Setting
03h : OVGR/SGR Setting
04h : SOE Data Setting
a) Requesting the Set Data of Measuring Part
Command 1Dh
Sub Command 00h
b) Requesting the Set Data for OCR / OCGR
Command 1Dh
Sub Command 01h
c) Requesting the Set Data for OVR / UVR
Command 1Dh
Sub Command 02h
d) Requesting the Set Data for OVGR / SGR
Command 1Dh
Sub Command 03h
e) Requesting information of enabling SOE and status of Timer
Command 1Dh
Sub Command 04h
- Setting Data
Command 0Dh
Sub Command
00h : Measuring Part Setting
01h : OCR/OCGR Setting
02h : OVR/UVR Setting
03h : OVGR/SGR Setting
04h : SOE Data Setting
Setting Data ~ 11 Byte
Data Check Sum Check Sum