3-6 Ultra320 SCSI Host Adapter Characteristics
Version 2.3 Copyright © 2002–2004, 2006 by LSI Logic Corporation. All rights reserved.
3.1.3 LSI20320IE and LSI20320ILE Single Channel Host Adapters
The LSI20320IE series of host adapters are single channel Ultra320
SCSI host adapters that provide one Ultra320 SCSI channel. The SCSI
Channel A interface is made through connectors J2 and J3.
Features of the LSI20320IE series of host adapters are:
• Single Ultra320 SCSI channel
• Two SCSI connectors
– One external 68-pin very high density cable interconnect (VHDCI)
connection
– One internal 68-pin high density (HD) connector
• PCI low profile bracket (LSI20320ILE)
• LVD/SE termination
• Fusion-MPT architecture
Details of the LSI20320IE series of host adapters are:
• J1: PCI Express, x4, universal type board edge connector
• J2: 68-pin VHDCI shielded right-angle external connector
• J3: 68-pin HD right-angle internal connector
• HDR2: 4-pin low density unshrouded right-angle LED connector
• Subsystem Vendor ID and Subsystem IDs are:
During system initialization, the system loads the ID numbers into the
Subsystem Vendor ID and Subsystem ID registers of the embedded
SCSI controller.
Host Adapter Chip Subsystem Vendor ID Subsystem ID
LSI20320IE 1020A 0x1000 7100
LSI20320ILE 1020A 0x1000 7100
To Next Page
Loading...
Need help?
General
