Appendix MASTER-K
A-7
The device number of flags when m is 1 ~ 3
High Speed Link Type D area Address Remark
High Speed Link 2
(m=1)
Dx620 to Dx633
High Speed Link 3
(m=2)
Dx640 to Dx653
High Speed Link 4
(m=3)
Dx660 to Dx673
Compared to the D area addresses shown in the [TABLE
3], where m = 0, they are calculated as shown below
where m = 1 to 3.
∗ Address of D area = Address shown in the [TABLE3]
+ 11 × m, where n = 1 to 3
The ‘k’
indicates the number of block. The status of 16 block is stored in a word. Therefore,
total 4 words are used for storing the status of 64 blocks
(k: 0 ~ 63). For example, the status
of mode status of block 55 is stored in the Dx608.7 bit.
To Next Page
