Need help?Do you have a question about the LSIS Master-K K1000S and is the answer not in the manual?
General| Model | K1000S |
|---|---|
| Category | Controller |
| Series | Master-K |
| Type | Programmable Logic Controller (PLC) |
| Program Memory | 32 KB |
| Data Memory | 16 KB |
| Communication Ports | RS-232C, RS-485 |
| Power Supply | 24 VDC |
| Weight | 0.5 kg |
| CPU Type | 32-bit RISC |
| I/O Capacity | Up to 256 points |
| Programming Language | Ladder Diagram |
| Operating Temperature | 0°C to 55°C |
| Dimensions | 90 x 80 x 60 mm |
Important safety precautions for installing, wiring, operating, servicing, or inspecting the equipment.
Covers various aspects of CPU modules, including specifications and operations.
Details the performance specifications of K200S/300S/1000S series CPU modules.
Explains CPU operation methods, including scan and interrupt processing.
Describes the classification and processing methods of programs within the CPU module.
Details the different operation modes (RUN, STOP, PAUSE, DEBUG) of the CPU module.
Covers special functions like RTC, forced I/O, and self-diagnosis.
Covers installation environment, precautions, mounting, and wiring instructions.
Details installation environment, precautions, heat protection, and power supply calculation.
Explains the procedures for mounting and dismounting modules from the base board.
Provides wiring instructions for power supply, I/O devices, grounding, and cable specifications.
Explains how to resolve common errors and problems with the PLC system.
Outlines basic steps for troubleshooting, including visual checks and power cycling.
Addresses specific troubleshooting scenarios for common issues like LED status and program download.
Provides a questionnaire to gather necessary information before contacting support.
Gives typical examples of input and output circuit troubles with corrective actions.
Lists error codes returned by the PLC and their corresponding corrective actions.
Lists error codes returned by the PLC during RS-232C communication.
Introduces the built-in PID control function for K200S B and C type CPU modules.
Explains PID control concepts and characteristics of the K200S PID function.
Details the control actions: proportional, integral, derivative, PID, and forward/reverse.
Explains how to derive discrete formulas for P, I, and D terms and pseudo code.
Introduces PID control instructions: PIDCAL and PIDTUN.
Introduces the built-in high-speed counter (HSC) function of the K200S C type CPU.
Explains the features of the built-in high-speed counter.
Explains the HSC instruction format and its input/output functions.
To Next Page
