LSIS Master-K K1000S - Mounting; Dismounting of Module; Mounting a Module on a Base

Chapter 10 Installation and wiring MASTER-K
10-7
10.2 Mounting / dismounting of module
10.2.1 Mounting a module on a base
1) K200S
- Insert a module to an empty slot along the guide rail until the hook is locked with the
base board.
- Check that the module is firmly locked into the base board.
Remark
The CPU module should be mounted the next slot of the slot for power supply module. If the
CPU module is inserted on other slots and the GM6-PAFB or GM6-PDFB is used, the
CPU
module is damaged by the ±15VDC supplied from the power module.
Guide rail
Hook
Locking part for hook
Locked hook