Need help?Do you have a question about the LSIS XEC-DR64H and is the answer not in the manual?
General| Brand | LSIS |
|---|---|
| Model | XEC-DR64H |
| Category | Controller |
| Language | English |
Describes the XGB series system configuration, including expansion capabilities for different module types.
Explains the Cnet I/F system and Ethernet system configurations for communication within the XGB series.
Details the performance specifications of the XGB main module types, including memory, processing speed, and I/O points.
Provides detailed power supply specifications for the main units, including input voltage, current, and output ratings.
Covers program instruction methods, execution types like cyclic scan, interrupts, and momentary power failure handling.
Explains program configuration types (Initializing, Scan, Interrupt, Subroutine) and execution methods.
Describes the three CPU module operation modes: RUN, STOP, and DEBUG, detailing their processing and mode changes.
Guides on setting the XGB PLC type, including CPU type and language selection during project setup.
Explains how to set basic parameters, I/O parameters, and other configurations via the project window.
Covers self-diagnosis features like error log saving and troubleshooting procedures for PLC system issues.
Details the digital input specifications for main units, including voltage, current, resistance, and response time.
Provides digital output specifications for main units, covering output points, load ratings, and response time.
Details the performance specifications of the built-in high-speed counter, including input signals, count modes, and output.
Provides critical safety instructions for PLC system design, including protection circuits and error handling.
Details the procedures for attaching and detaching modules, along with essential handling precautions.
Covers wiring precautions, power wiring, I/O device wiring, grounding, and cable specifications.
Outlines general maintenance and inspection procedures for the PLC, including checks for voltage, environment, and parts.
Provides basic troubleshooting steps, including visual checks, trouble identification, and narrowing down possible causes.
Presents flowcharts for diagnosing issues based on LED status (POWER, ERR, RUN) and I/O module operation.
Illustrates common input and output circuit troubles with their causes and corrective actions for practical problem-solving.
A comprehensive list of error codes, their causes, actions, operation status, and diagnosis points.
To Next Page
