To Next PageTo Next Page
Need help?Do you have a question about the LSIS XGL-EFMTB and is the answer not in the manual?
General| Model | XGL-EFMTB |
|---|---|
| Form Factor | Low Profile |
| Manufacturer | LSI |
| Interface | PCIe |
| Controller Type | SAS/SATA |
| Ports | 8 Internal |
| RAID Levels | 0, 1, 10 |
| Data Transfer Rate | 6Gb/s per port |
Explains general safety rules and terminology for product use.
Safety guidelines for designing systems with the PLC.
Safety precautions during the physical installation of the PLC.
Critical safety measures for correctly wiring the PLC.
Safety protocols for testing, operating, and maintaining the PLC.
Lists the key characteristics and capabilities of the FEnet I/F module.
Details performance metrics and capabilities of specific FEnet I/F modules.
Lists essential safety and procedural precautions before installing the module.
Provides detailed instructions for installing specific FEnet I/F modules.
Details different Ethernet network topologies and compositions.
Guides through initial setup steps like PLC type and module registration within XG5000.
Explains how to configure high-speed link parameters and settings using XG5000.
Describes the process of configuring P2P parameters and settings within XG5000.
Details procedures for downloading and uploading parameters using XG5000.
Explains how to use XG5000 for diagnosing system status and module information.
Diagnoses module status using LED indicators for different models.
Checks for errors and warnings using XG5000 software's PLC history.
Guides on identifying and troubleshooting module issues based on specific error codes.
Lists communication error codes and their details for troubleshooting.
