LSIS XGL-EFMTB - High-Speed Link Parameters Settings; Execution of XG5000

Chapter 6 High-speed Link Service
6-4
6.4 High-speed Link Parameters Settings
High-speed link parameters shall be setup by the means of setup respective items for High-speed link
after selecting High-speed link parameter number on the Hs link screen of XG5000. The setting steps
and the functions of respective items are explained below.
6.4.1 Execution of XG5000
The initial screen of XG5000 will be displayed as shown below [Fig. 6.4.1] when XG5000 is
executed.
[Fig. 6.4.1] Initial screen of XG5000