Chapter 5 XG5000 Program
5-19
5.4 P2P Settings
5.4.1 P2P parameters
P2P setting of FEnet I/F module will be described. P2P Setting is possible to up to 8
Each P2P set the block up to 64.
(1) Choose one method in two methods from Initial selection screen
1) Click project tab, Right click [Unspecified network]
[fig.5.4.1] Select communication module from Project tab
2) Click view P2P tab, Right click ‘PLC name’
[fig.5.4.2] Select View P2P tab
(2) Setting Communication module
To Next Page
Loading...