LSIS XGL-EFMTB - High-Speed Link Settings; Setting of High-Speed Link Parameters

Chapter 5 XG5000 Program
5-13
5.3 High-speed Link Settings
5.3.1 Setting of High-speed link parameters
How to set High-speed link communication of FEnet I/F module will be described.
High speed links of FEnet I/F module are supported up to 12 according to the number of
installed module. For each HS link, 32 transmission blocks, 128 reception blocks are available.
And in case of combined setting of transmission/reception block, 128 blocks are available.
(1) Choose one method in two methods from Initial selection screen
1) Click project tab, Right click [Unspecified network]
[fig.5.3.1] Select High speed Communication from Project tab
2) Click view High-speed Link tab, Right click ‘PLC name’
[fig.5.3.2] Select High speed Communication