Chapter 1 Overview
1-3
1.2.2 Characteristic of XGL-EH5T (switch)
Switch module is HUB module having the switching function for interface with system based on Ethernet or
XGT FEnet module. It improves the weak points of the external hub module (using external power source and
low reliability) and it can be installed on XGT base to simplify the work and reduce the fault factor.
(1) Available to install at XGT base
It doesn’t need a external power source and can be installed at XGT base. Compact size for easy installation
(2) Reliability applying to industrial standard
It passed the noise, environment test based our company standard comparing other switches
(3) Built-in Auto Cross Over function (For convenience of wiring)
(4) High speed link function is guaranteed
It canceled Broadcast storm function for normal operation of High speed link packet
(5) CHS GROUND supported at RJ-45 connector
In case of using shielded cable (FTP/STP), effective for reducing the transmission error rate
To Next Page
Loading...